Mini-fix to connect Designer's Choice
Install CAMS into the 15mm (just over 1/2") holes
with the arrow facing the direction of the 3/8" through-hole

1. STARTER CONNECTION
To assemble (2) pieces perpendicular to each other (a back to a panel, a header to a side or a kickboard to a side). Push CAMS into the holes. Screw DOWELS into the brass inserts. Slice the piece with the CAMS flush to the piece with the DOWELS protruding and tighten CAMS.

2. ADD-ON CONNECTION
To assemble (2) pieces edge-to-edge with a panel in-between. Installl CAMS. Insert the longer end of the ADD-ON DOWEL through the in-between panel into the 3/8" through-holes on first piece and tighten the CAM. The ADD-ON DOWEL should protrude through the in-between panel. Slide the second piece flush to the panel and tighten the CAM in the second panel.